Toyota Camry Manual page 2355

Hide thumbs Also See for Camry:

Table of Contents

MANUAL TRANSAXLE (S51)

INSPECT SHIFT FORK AND HUB SLEEVE CLEAR-

Using a feeler gauge, measure the clearance between the hub

sleeve and shift fork.

Maximum clearance:

1.0 mm (0.039 in.)

If the clearance exceeds the maximum, replace the shift fork or

INSPECT OUTPUT SHAFT

Using a micrometer, measure the outer diameter of the

output shaft journal surface.

Minimum outer diameter:

Part A: 31.970 mm (1.2587 in.)

Part B: 37.970 mm (1.4949 in.)

Part C: 31.990 mm (1.2594 in.)

If the outer diameter is less than the minimum, replace the out-

Using a dial indicator, check the shaft runout.

Maximum runout:

0.05 mm (0.0020 in.)

If the runout exceeds the maximum, replace the output shaft.

OUTPUT SHAFT

Show Quick Links

Table of Contents