Toyota Camry Manual page 2585

SFI (5S–FE)
INSPECTION
+B
1.
(a)
(b)
Ohmmeter
HT
If the resistance is not as specified, replace the sensor.
(c)
B06365
2.
– AIR–FUEL RATIO (A/F) SENSOR (California)
INSPECT HEATER RESISTANCE OF A/F SENSOR
Disconnect the A/F sensor connector.
Using an ohmmeter, measure the resistance between ter-
minals +B and HT.
Resistance: 0.8 – 1.4 Ω at 20°C (68°F)
Torque: 44 N·m (450 kgf·cm, 32 ft·lbf)
Reconnect the A/F sensor connector.
INSPECT OPERATION OF A/F SENSOR
(See page DI–152)
Author :
SF–59
SF0EC–04
Date :
1492