Toyota Camry Manual page 2129

EM–16
Clamp
Clamp
ENGINE MECHANICAL (1MZ–FE)
10.
Remove the 4 bolts and timing belt cover.
11.
P18820
12.
(a)
(b)
A01800
13.
Remove the 2 bolts, nut and mounting bracket.
P18814
14.
(a)
(b)
NOTICE:
Always turn the crankshaft clockwise.
P18808
(c)
If not, turn the crankshaft 1 revolution (360°).
(d)
A05052
– TIMING BELT
REMOVE NO.1 TIMING BELT COVER
REMOVE TIMING BELT GUIDE
REMOVE NO.2 TIMING BELT COVER
Disconnect the engine wire protector clamps from the
No.3 timing belt cover.
Remove the 5 bolts and timing belt cover.
REMOVE RH ENGINE MOUNTING BRACKET
SET NO.1 CYLINDER TO TDC/COMPRESSION
Temporarily install the crankshaft pulley bolt to the crank-
shaft.
Turn the crankshaft, and align the timing marks of the
crankshaft timing pulley and oil pump body.
Check that timing marks of the camshaft timing pulleys
and No.3 timing belt cover are aligned.
Remove the crankshaft pulley bolt.
Author : Date :
1302