Toyota Camry Manual page 2051

EM–52
SST
Intake
Gray
Black
ENGINE MECHANICAL (5S–FE)
REASSEMBLY
HINT:
1.
(a)
P03274
HINT:
Exhaust
The intake valve oil seal is gray and the exhaust valve oil seal
is black.
(b)
Z02903
(c)
SST
P03265
(d)
2.
(a)
(b)
3.
Install the sensor assembly with the bolt.
P03276
– CYLINDER HEAD
Thoroughly clean all parts to be assembled.
Before installing the parts, apply new engine oil to all slid-
ing and rotating surfaces.
Replace all gaskets and oil seals with new ones.
INSTALL VALVES
Using SST, push in a new oil seal.
SST 09201–41020
Install the valve, spring seat, valve spring and spring re-
tainer.
Using SST, compress the valve spring and place the 2
keepers around the valve stem.
SST 09202–70020 (09202–00010)
Using a plastic–faced hammer, lightly tap the valve stem
tip to assure a proper fit.
INSTALL VALVE LIFTERS AND SHIMS
Install the valve lifter and shim.
Check that the valve lifter rotates smoothly by hand.
INSTALL CAMSHAFT POSITION SENSOR AS-
SEMBLY
Torque: 9.5 N·m (97 kgf·cm, 84 in.·lbf)
Author :
EM0YM–01
Date :
1224