Toyota Camry Manual page 1675

DI–648
5 Check spiral cable.
Spiral
Cable
D Squib
D–
H01000
R14286
OK
6 Check harness between airbag sensor assembly and spiral cable.
Spiral
Cable
D Squib
D–
(–)
(+)
H01004
R14286
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
Disconnect the connector between the airbag sensor assembly
and the spiral cable.
Airbag
CHECK:
Sensor
For the connector (on the spiral cable side) between the spiral
Assembly
cable and the steering wheel pad, measure the resistance be-
tween D+ and D–.
OK:
Resistance: Below 1 Ω
D+
H01142
NG
CHECK:
For the connector (on the spiral cable side) between the airbag
Airbag
Sensor sensor assembly and the spiral cable, measure the resistance
Assembly
between D+ and D–.
OK:
Resistance: Below 1 Ω
D+
NG
H01143
– SUPPLEMENTAL RESTRAINT SYSTEM
Repair or replace spiral cable.
Repair or replace harness or connector be-
tween airbag sensor assembly and spiral cable.
Author : Date :
883