Toyota Camry Manual page 2005

EM–6
SST (A)
SST (B)
(d)
ENGINE MECHANICAL (5S–FE)
P13989
(b)
(c)
S05289
– VALVE CLEARANCE
Exhaust: N = T + (A – 0.33 mm (0.013 in.))
(3) Select a new shim with a thickness as close as pos-
sible to the calculated value.
HINT:
Shims are available in 17 sizes in increments of 0.05 mm
(0.0020 in.), from 2.50 mm (0.0984 in.) to 3.30 mm (0.1299 in.).
(c) Install a new adjusting shim.
(1) Place a new adjusting shim on the valve lifter.
(2) Using SST (A), press down the valve lifter and re-
move SST (B).
SST 09248–55040 (09248–05410, 09248–05420)
(d) Recheck the valve clearance.
5. REINSTALL CYLINDER HEAD COVER
(a) Install the cylinder head cover. (See page EM–53)
(b) Connect the PCV hose to the intake manifold.
(c) Connect the PCV hose to the cylinder head cover.
(d) Install the engine wire clamp to the mounting bolt of the
No.2 timing belt cover.
(e) Install the 4 high–tension cords to the clamps on the cylin-
der head cover.
(f) Connect the 4 high–tension cords to the spark plugs.
Author : Date :
1178