Toyota Camry Manual page 1771

DI–744
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check P/T squib (LH) circuit.
P/T Squib (LH)
PL+
(+)
H01016
H02141
OK
DIAGNOSTICS
Airbag
Sensor
Assembly
PL–
(–)
H02211
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
Release the airbag activation prevention mechanism of the
connector (on the airbag sensor assembly side) between the
airbag sensor assembly and the seat belt pretensioner (LH).
(See page DI–626)
CHECK:
For the connector (on the seat belt pretensioner side) between
the seat belt pretensioner (LH) and the airbag sensor assembly,
measure the resistance between PL+ and PL–.
OK:
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween seat belt pretensioner (LH) and airbag
sensor assembly.
Author : Date :
979