Toyota Camry Manual page 2353

MX–30
MANUAL TRANSAXLE (S51)
5. REMOVE NO.1 HUB SLEEVE ASSEMBLY, 1ST GEAR,
SYNCHRONIZER RING, NEEDLE ROLLER BEARING,
THRUST WASHER AND LOCKING BALL
(a) Using a press, remove the No.1 hub sleeve, 1st gear and
synchronizer ring.
(b) Remove the needle roller bearing and locking ball.
(c) Using a screwdriver and hammer, drive out the thrust
washer.
Z00427
6. REMOVE NO.1 HUB SLEEVE, 3 SHIFTING KEYS AND
SPRINGS FROM NO.1 CLUTCH HUB
Q02948
– OUTPUT SHAFT
Author : Date :
1880