SF–34
(a)
(c)
SFI (5S–FE)
INSTALLATION
1.
INSTALL THROTTLE BODY
(a)
Connect the water bypass hose (from the water bypass
pipe) to the throttle body.
(b)
Connect the water bypass hose (from the water outlet) to
the throttle body.
(c)
California:
(b)
Connect the air hose (from the intake manifold) for air as-
sist system to the throttle body.
S05534
(d)
Install a new gasket and the throttle body with the 3 bolts.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
(e)
Connect the 2 vacuum hoses to the throttle body.
(f)
Connect the throttle position sensor connector.
(g)
Connect the IAC valve connector.
2.
CONNECT ACCELERATOR CABLE TO THROTTLE
BODY
3.
A/T:
CONNECT THROTTLE CABLE TO THROTTLE BODY
B01283
4.
INSTALL AIR CLEANER CAP (See page EM–75)
5.
FILL WITH ENGINE COOLANT
–
THROTTLE BODY
Author :
SF0DR–03
Date :
1467