Toyota Camry Manual page 2548

SF–22
(e)
SFI (5S–FE)
(c)
(d)
S05289
B06353
B06354
– INJECTOR
REMOVAL
1. REMOVE CYLINDER HEAD COVER
(a) Disconnect the 4 high–tension cords from the clamps on
the cylinder head cover.
(b) Disconnect the 4 high–tension cords from the spark
plugs.
(c) Disconnect the PCV hose from the intake manifold.
(d) Disconnect the PCV hose from the cylinder head cover.
(e) Disconnect the engine wire clamp from the mounting bolt
of the No.2 timing belt cover.
(f) Remove the cylinder head cover. (See page EM–33)
NOTICE:
Cover the cylinder head with a clean cloth to prevent dirt,
etc. getting into the cylinder head.
2. REMOVE DELIVERY PIPE AND INJECTORS
(a) Disconnect the 4 injector connectors.
(b) Remove the 2 bolts holding the delivery pipe to the cylin-
der head.
(c) Disconnect the delivery pipe from the 4 injectors.
(d) Pull out the 4 injectors.
NOTICE:
Be careful not to drop the injectors.
(e) Remove the 4 insulators (Except California) and 2
spacers from the cylinder head.
(f) California:
Remove the 2 O–rings, insulator and grommet from each
injector.
(g) Except California:
Remove the O–ring and grommet from each injector.
Author :
SF0DI–03
Date :
1455