Toyota Camry Manual page 1692

3 Check airbag sensor assembly.
P Squib
Airbag
Sensor
Assembly
P+
P–
DLC1
E1 Tc
H01023 H02144
AB0118
AB0118
R13006 H01075
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
(c)
ACC ON
CHECK:
(a)
or
(b)
DTC B0107/51
(c)
(d)
(e)
H02255
OK:
HINT:
Codes other than code B0107/51 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect P+ and P– of the connector
(on the front passenger airbag assembly side) between
the front passenger airbag assembly and the airbag sen-
sor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0107/51 is not output.
NG Replace airbag sensor assembly.
Author :
DI–665
Date :
900