Toyota Camry Manual page 2024

SST
SST
SST
Turn
ENGINE MECHANICAL (5S–FE)
(b)
(c)
(d)
A02591
8.
(a)
SST
(b)
HINT:
Either of 2 types of pulley may be used, each with its own bolt
size, type A (91651–60855) and type B
S05588
(part No. 91121–40665).
9.
(a)
(b)
Fulcrum
Length
S05592
HINT:
Use a torque wrench with a fulcrum length of 340 mm (13.39
in.).
10.
(a)
S05587
– TIMING BELT
Install the timing belt cover with the 4 bolts.
Install the clamp of the crankshaft position sensor wire to
the timing belt cover.
Install the crankshaft position sensor wire to the clamp on
the timing belt cover.
INSTALL CRANKSHAFT PULLEY
Align the pulley set key with the key groove of the pulley,
and slide on the pulley.
Using SST (and bolt), install the pulley bolt.
SST 09213–54015 (91651–60855),09330–00021
Torque: 108 N·m (1,100 kgf·cm, 80 ft·lbf)
INSTALL CAMSHAFT TIMING PULLEY
Align the camshaft knock pin with the knock pin groove of
the pulley, and slide on the timing pulley.
Using SST, install the pulley bolt.
SST 09249–63010, 09960–10010 (09962–01000,
09963–01000)
Torque:
54 N·m (550 kgf·cm, 40 ft·lbf)
37 N·m (380 kgf·cm, 27 ft·lbf) for use with SST
SET NO.1 CYLINDER TO TDC/COMPRESSION
Turn the crankshaft pulley, and align its groove with timing
mark "0" of the No.1 timing belt cover.
Author :
EM–25
Date :
1197