Toyota Camry Manual page 1735

DI–708
5 Check sub wire harness.
Squib (LH)
Sub Wire Harness
(–)
(+)
H02280
W03859
OK
6 Check harness between airbag sensor assembly and sub wire harness.
Squib (LH)
Sub Wire Harness
(+)
(–)
H02281
W03859
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
Airbag
Sensor
Assembly
SFL–
SFL+
H03262
Airbag
Sensor
Assembly
SFL– SFL+
H03263
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Disconnect sub wire harness connector on the airbag
sensor assembly side.
(b) Release the airbag activation prevention mechanism of
the sub wire harness connector on the airbag sensor as-
sembly side. (See page DI–626)
CHECK:
For the connector (on the sub wire harness side) between the
side airbag assembly and the sub wire harness, measure the
resistance between SFL+ and SFL–.
OK:
Resistance: 1 MΩ or Higher
NG Repair or replace sub wire harness.
PREPARATION:
Release the airbag activation prevention mechanism of the air-
bag sensor assembly connector. (See page DI–626)
CHECK:
For the connector (on the sub wire harness side) between the
airbag sensor assembly and sub wire harness, measure the re-
sistance between SFL+ and SFL–.
OK:
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween airbag sensor assembly and sub wire
harness.
Author : Date :
943