Toyota Camry Manual page 1795

DI–768
4 Check wire harness.
Side Airbag Sensor
Assembly (LH)
SSL+
ESL
ESL
(+)
H01010
H01058 (–)
H01050
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
CHECK:
For the connector (on the airbag sensor assembly side) be-
tween the side airbag sensor assembly (LH) and the airbag
sensor assembly, measure the resistance between SSL+ and
Airbag Sensor
ESL.
Assembly
OK:
SSL+
H01166
– SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect the side airbag sensor assembly (LH).
Using a service wire, connect SSL+ and ESL of the con-
nector (on the side airbag sensor assembly side) between
the side airbag sensor assembly (LH) and the airbag sen-
sor assembly.
Resistance: Below 1 Ω
NG Repair or replace harness or connector be-
tween side airbag sensor assembly (LH) and air-
bag sensor assembly.
Author : Date :
1003