Toyota Camry Manual page 1740

3 Check airbag sensor assembly.
Squib (LH)
Airbag
Sensor
Assembly
SFL– SFL+
DLC1
E1 Tc
H02278
AB0118 AB0119
R13006
H01074
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
(c)
CHECK:
ACC ON
(a)
or
(b)
DTC B0116/48
(c)
(d)
(e)
H03264
OK:
HINT:
Codes other than code B0116/48 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect SFL+ and SFL– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (LH) and the airbag sensor assem-
bly.
Connect negative (–) terminal cable to the battery, and
wait at least 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0116/48 is not output.
NG Replace airbag sensor assembly.
Author :
DI–713
Date :
948