Toyota Camry Manual page 1712

5 Check sub wire harness.
Sub Wire Harness
Squib (RH)
SFR–
(–)
(+)
H02275
W03859
OK
6 Check harness between airbag sensor assembly and sub wire harness.
Sub Wire Harness
Squib (RH)
SFR–
(–)
(+)
H02276
W03859
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
Disconnect the sub wire harness connector on the airbag sen-
Airbag
sor assembly side.
Sensor
CHECK:
Assembly
For the connector (on the sub wire harness side) between the
side airbag assembly and the sub wire harness, measure the
resistance between SFR+ and SFR–.
OK:
SFR+
NG
H03247
CHECK:
For the connector (on the airbag sensor assembly side) be-
Airbag
tween the airbag sensor assembly and the sub wire harness,
Sensor
measure the resistance SFR+ and SFR–.
Assembly
OK:
SFR+
NG
H03248
– SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: Below 1 Ω
Repair or replace sub wire harness.
Resistance: Below 1 Ω
Repair or replace harness or connector be-
tween airbag sensor assembly and sub wire
harness.
Author :
DI–685
Date :
920