Toyota Camry Manual page 2075

EM–76
A/T
Black
Colored
Bolt
TMMK
Made
TMC
Made
ENGINE MECHANICAL (5S–FE)
7.
(a)
(b)
Turn
Z19014
HINT:
First tighten the black colored bolt, install the other bolts.
8.
(a)
(b)
S05530
9.
Install the stiffener plate with the 4 bolts.
10.
Install the manifold stay with the 2 bolts.
A02198
11.
(a)
(b)
(c)
S05526
– ENGINE UNIT
A/T:
INSTALL TORQUE CONVERTER CLUTCH BOLTS
Apply adhesive to 2 or 3 threads of the bolt end.
Adhesive:
Part No. 08833–00070, THREE BOND 1324 or equiva-
lent
Hold the crankshaft pulley bolt with a wrench, and install
the 6 bolts evenly.
Torque: 27 N·m (280 kgf·cm, 20 ft·lbf)
INSTALL NO.2 REAR END PLATE, OIL PAN INSULA-
TOR AND EXHAUST PIPE BRACKET
Install the oil pan insulator to the rear end plate.
Install the rear end plate and exhaust pipe bracket with
the 4 bolts.
Torque:
9.3 N·m (95 kgf·cm, 82 in.·lbf) for 10 mm head
19 N·m (195 kgf·cm, 14 ft·lbf) for 12 mm head
INSTALL RH STIFFENER PLATE
Torque: 39 N·m (398 kgf·cm, 29 ft·lbf)
INSTALL INTAKE MANIFOLD STAY
Torque: 39 N·m (398 kgf·cm, 29 ft·lbf)
INSTALL LH STIFFENER PLATE AND NO.2 EXHAUST
MANIFOLD STAY
TMC Made:
Temporarily install the stiffener plate and manifold stay
with the 2 bolts and 2 nuts.
TMMK Made:
Temporarily install the stiffener plate and manifold stay
with the 3 bolts and nut.
Tighten the 2 bolts holding the stiffener plate to the trans-
axle.
Author : Date :
1248