INSPECTION PROCEDURE
1
Is DTC B1141/33 out put?
ACC
ON
or
DLC1
E1
Tc
AB0119
AB0118
R13006 H09530
NO
2
Is connector of side airbag sensor assembly (LH) properly connected?
3
Prepare for inspection. (See step 1 on page DI–787)
DIAGNOSTICS
CHECK:
(a)
(b)
(c)
(d)
DTC B1141/33
(e)
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
H09529
YES
–
SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
The malfunctioning part can now be considered
normal. To make sure of this, use the simulation
method to check.
Author :
DI–767
Date :
1002