ENGINE MECHANICAL (5S–FE)
(f)
(g)
(h)
(i)
(j)
(k)
23.
24.
–
CYLINDER BLOCK
Install the wire clamp to the generator drive belt adjusting
bar.
Connect the IAC valve water bypass hose to the water by-
pass pipe.
Connect the water bypass hose (from the water bypass
pipe) to the water outlet.
Install the camshafts. (See page EM–53)
Install the cylinder head cover.
(1)
Install the cylinder head cover. (See page EM–53)
(2)
Connect the PCV hose to the intake manifold.
Install the No.3 timing belt cover with the 3 bolts.
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
INSTALL TIMING BELT AND PULLEYS
(See page EM–23)
DISCONNECT ENGINE FROM ENGINE STAND
Author :
EM–113
Date :
1285