Toyota Camry Manual page 1733

DI–706
3 Check airbag sensor assembly.
Squib (LH)
ACC
or
DLC1
E1 Tc
H08254
W03860
AB0118 AB0119
H01073
R13006
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
CHECK:
Assembly
(a)
(b)
ON
(c)
(d)
DTC B0115/47
(e)
OK:
HINT:
Codes other than code B0115/47 may be output at this time, but
H08253
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0115/47 is not output.
NG Replace airbag sensor assembly.
Author : Date :
941