Toyota Camry Manual page 1897

DI–870
CRUISE MAIN Indicator Light
Indicator light
0.5 sec.
1.5 sec.
ON
OFF
DLC2
Tc
DIAGNOSTICS
PRE–CHECK
1.
(a)
HINT:
I00279
If the indicator check result is not normal, proceed to trouble-
shooting (See page BE–2) for the combination meter section.
(b)
HINT:
If a malfunction occurs in the No. 1 vehicle speed sensor or ac-
tuator, etc. during cruise control driving, the ECU actuates
AUTO CANCEL of the cruise control and turns on and off the
CRUISE MAIN indicator light to inform the driver of a malfunc-
tion. At the same time, the malfunction is stored in memory as
a DTC.
BE4034
(c)
E1
I00169
– CRUISE CONTROL SYSTEM
DIAGNOSIS SYSTEM
Check the indicator.
(1) Turn the ignition switch ON.
(2) Check that the CRUISE MAIN indicator light comes
ON when the cruise control main switch is turned
ON, and that the indicator light goes OFF when the
main switch is turned OFF.
Check the DTC.
Output of DTC using diagnosis check wire.
(1) Turn the ignition switch ON.
(2) Using SST, connect terminals Tc and E
SST 09843–18020
(3) Read the DTC on the CRUISE MAIN indicator light.
Author :
DI1KS–03
of DLC2.
1
Date :
1105