Toyota Camry Manual page 1672

DTC B0101/14
CIRCUIT DESCRIPTION
The D squib circuit consists of the airbag sensor assembly, spiral cable and steering wheel pad.
It causes the airbag to deploy when the airbag deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0101/14 is recorded when an open is detected in the D squib circuit.
DTC No.
D Open circuit in D+ wire harness or D– wire harness of
squib
D D squib malfunction
B0101/14
D Spiral cable malfunction
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–640.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check D squib circuit.
Spiral
Cable
D Squib
D–
(–) (+)
H01001
R14286
OK
DIAGNOSTICS
Open in D Squib Circuit
DTC Detecting Condition
CHECK:
For the connector (on the spiral cable side) between the spiral
cable and the steering wheel pad, measure the resistance be-
Airbag tween D+ and D–.
Sensor
OK:
Assembly
Resistance: Below 1 Ω
D+
NG
H01139
– SUPPLEMENTAL RESTRAINT SYSTEM
D Steering wheel pad (D squib)
D Spiral cable
D Airbag sensor assembly
D Wire harness
Go to step 5.
Author :
DI–645
Trouble Area
Date :
DI18R–16
880