Toyota Camry Manual page 2074

M/T
7
6
4
2
Ground
Strap
ENGINE MECHANICAL (5S–FE)
EM7333
1
3
5
8
Z18989
Wire
Bracket
S05531
– ENGINE UNIT
INSTALLATION
1. INSTALL NO.1 REAR END PLATE
Install the end plate with the bolt.
Torque: 9.3 N·m (95 kgf·cm, 82 in.·lbf)
2. M/T:
INSTALL FLYWHEEL
(a) Apply adhesive to 2 or 3 threads of the bolt end.
Adhesive:
Part No. 08833–00070, THREE BOND 1324 or equiva-
lent
(b) Install the flywheel on the crankshaft.
(c) Install and uniformly tighten the 8 bolts in several passes,
in the sequence shown.
Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)
3. A/T:
INSTALL DRIVE PLATE (See step 2)
Torque: 83 N·m (850 kgf·cm, 61 ft·lbf)
4. M/T:
INSTALL CLUTCH DISC AND COVER
5. A/T:
CHECK TORQUE CONVERTER CLUTCH INSTALLA-
TION (A140E: See page AX–25)
6. INSTALL TRANSAXLE TO ENGINE
(a) Attach the transaxle to the engine.
(b) Install the ground strap, wire bracket and 4 bolts.
Torque:
46 N·m (470 kgf·cm, 34 ft·lbf) for 14 mm head
64 N·m (650 kgf·cm, 47 ft·lbf) for 17 mm head
Author :
EM–75
EM08G–04
Date :
1247