Toyota Camry Manual page 2107

EM–108
Code Mark
No.1
No.2
Code Mark
Upper Side Rail
Expander
No.2
Compression
Ring
P
No.3
22.9 mm
ENGINE MECHANICAL (5S–FE)
2.
(a)
(b)
A06588
(c)
No.1
Compression
Ring
NOTICE:
Do not align the ring ends.
Front
Mark
(Cavity)
Lower Side Rail
A07351
3.
(a)
(b)
P00797
4.
Others
HINT:
19.2 mm
P05533
(a)
P05353
– CYLINDER BLOCK
INSTALL PISTON RINGS
Install the oil ring expander and 2 side rails by hand.
Using a piston ring expander, install the No.2 and No.1
piston rings with the code mark facing upward.
Code mark:
No.1
No.2
Position the piston rings so that the ring ends are as
shown.
INSTALL BEARINGS
Align the bearing claw with the groove of the connecting
rod or connecting cap.
Install the bearings in the connecting rod and connecting
rod cap.
INSTALL MAIN BEARINGS
Main bearings come in widths of 19.2 mm (0.756 in.) and
22.9 mm (0.902 in.). Install the 22.9 mm (0.902 in.) bear-
ings in the No.3 cylinder block journal position with the
main bearing cap. Install the 19.2 mm (0.756 in.) bearings
in the other positions.
Upper bearings have an oil groove and oil holes; lower
bearings do not.
Align the bearing claw with the claw groove of the cylinder
block, and push in the 5 upper bearings.
Author :
1N or T
2N or 2T
Date :
1280