Toyota Camry Manual page 2009

EM–10
ENGINE MECHANICAL (5S–FE)
IDLE SPEED
INSPECTION
1.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
2.
(a)
(b)
(c)
3.
(a)
S05331
(b)
If the idle speed is not as specified, check the IAC valve and air
intake system.
4.
– IDLE SPEED
INITIAL CONDITIONS
Engine at normal operating temperature
Air cleaner installed
All pipes and hoses of air induction system connected
All vacuum lines properly connected
SFI system wiring connectors fully plugged
All operating accessories switched OFF
Ignition timing check correctly
Transmission in neutral position
Air conditioning switched OFF
CONNECT TOYOTA HAND–HELD TESTER OR OBDII
SCAN TOOL
Remove the fuse cover on the instrument panel.
Connect a TOYOTA hand–held tester or OBDII scan tool
to the DLC3.
Please refer to the TOYOTA hand–held tester or OBDII
scan tool operator's manual for further details.
INSPECT IDLE SPEED
Race the engine at 2,500 rpm for approx. 90 seconds.
Check the idle speed.
Idle speed (w/ Cooling fan OFF): 700 ± 50 rpm
DISCONNECT TOYOTA HAND–HELD TESTER OR
OBDII SCAN TOOL
Author :
EM081–05
Date :
1182