Toyota Camry Manual page 1865

DI–838
CIRCUIT INSPECTION
Indicator Light Circuit
CIRCUIT DESCRIPTION
When the theft deterrent system is preparing to set, this circuit lights up the indicator light. When the system
has been set, it continuously turns the indicator light on for 1 second and turns it off for 1 second, thus blinking
the indicator light.
WIRING DIAGRAM
INSPECTION PROCEDURE
1 Check indicator light.
PREPARATION:
Remove combination meter.
CHECK:
Connect the positive (+) lead from the battery to terminal C9 and the negative (–) lead to terminal B16 of
combination meter connector then check indicator light comes ON.
(See combination meter on page BE–46)
OK
DIAGNOSTICS
Theft Deterrent
Indicator Light
BR
5
IH
– THEFT DETERRENT SYSTEM
Junction Connector
R–Y E
D
J9
J10
9
NG Replace combination meter.
Author :
Theft Deterrent ECU
6
R–Y
IND
T3
Date :
DI06S–04
I04447
1073