Toyota Camry Manual page 1808

11 Check engine room main wire harness.
Engine Room Main
Front Airbag
Wire Harness
Sensor (RH)
SR+
SR–
SR+
H03352
H09521 H09519
OK
Repair or replace harness or connector between airbag sensor assembly and engine room main
wire harness.
DIAGNOSTICS
PREPARATION:
(a)
Airbag
(b)
Sensor
Assembly
CHECK:
For the connector (on the engine room main wire harness side)
SR–
between the airbag sensor assembly and the engine room main
wire harness, measure the resistance between SR+ and SR–.
OK:
(+) (–)
H09522
NG
– SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect the engine room main wire harness connector
on the airbag sensor assembly side.
Using a service wire, connect SR+ and SR– of the con-
nector (on the engine room main wire harness side) be-
tween the engine room main wire harness and the front
airbag sensor (RH).
Resistance: Below 1 Ω
Repair or replace engine room main wire har-
ness.
Author :
DI–781
Date :
1016