Toyota Camry Manual page 2135

Hide thumbs Also See for Camry:

Table of Contents

ENGINE MECHANICAL (1MZ–FE)

Use a torque wrench with a fulcrum length of 340 mm (13.39

Using SST, install the pulley bolt.

09249–63010, 09960–10010 (09962–01000,

09963–01000)

Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)

INSTALL LH CAMSHAFT TIMING PULLEY

Face the flange side of the timing pulley inward.

Align the knock pin on the camshaft with the knock pin

groove of the timing pulley, and slide on the timing pulley.

Using SST, install the pulley bolt.

09960–10010 (09962–01000, 09963–01000)

Torque: 125 N·m (1,300 kgf·cm, 94 ft·lbf)

SET NO.1 CYLINDER TO TDC/COMPRESSION

Crankshaft Timing Pulley Position:

Temporarily install the crankshaft pulley bolt to the crank-

Crankshaft Timing Pulley Position:

Turn the crankshaft, and align the timing marks of the

crankshaft timing pulley and oil pump body.

Camshaft Timing Pulley Positions:

Using SST, turn the camshaft pulley, align the timing

marks of the timing pulley and No.3 timing belt cover.

09960–10010 (09962–01000, 09963–01000)

Show Quick Links

Table of Contents