INSPECTION PROCEDURE
1
Prepare for inspection. (See step 1 on page DI–787)
2
Check side squib (RH) circuit.
Squib (RH)
SFR–
(–)
(+)
H01019
W03859
OK
DIAGNOSTICS
PREPARATION:
Release the airbag activation prevention mechanism of the
Airbag
connector (on the airbag sensor assembly side) between the
Sensor
airbag sensor assembly and the side airbag assembly (RH).
Assembly
(See page DI–626)
CHECK:
For the connector (on the side airbag assembly side) between
the side airbag assembly (RH) and the airbag sensor assembly,
measure the resistance between SFR+ and SFR–.
SFR+
OK:
H01180
–
SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: 1 MΩ or Higher
NG
Repair or replace harness or connector be-
tween side airbag assembly (RH) and airbag
sensor assembly.
Author :
DI–671
Date :
906