Toyota Camry Manual page 1700

4 Check side squib (RH).
Airbag
Sensor
Squib (RH)
Assembly
ACC ON
or
DLC1
E1
Tc
H01021
AB0118 AB0119
R13006 H01069
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
(b)
(c)
(d)
CHECK:
(a)
(b)
DTC B0110/43
(c)
(d)
(e)
(f)
H01179
OK:
HINT:
Codes other than code B0110/43 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the side airbag assembly (RH) connector.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to LOOK, and wait at least for 20 se-
cond.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0110/43 is not output.
NG Replace side airbag assembly (RH).
Author :
DI–673
Date :
908