Toyota Camry Manual page 2412

MX–46
MANUAL TRANSAXLE (E153)
REASSEMBLY
1.
HINT:
Coat all of the sliding and rotating surfaces with gear oil before
reassembly.
(a)
(b)
(c)
Z00295
(d)
HINT:
Push the pinion gear and spider with the 4 pinions to the differ-
ential left case.
(e)
Z00296
(f)
Z00297
(g)
Z00298
– DIFFERENTIAL CASE
ASSEMBLE DIFFERENTIAL CASE
Install the thrust washer to the side gear.
Install the 4 pinions and thrust washers to the spider.
Install the side gear and spider with the 4 pinions to the
differential left case.
Using a dial indicator, measure the backlash of the pinion
gear while holding the differential left case.
Standard backlash:
0.05 – 0.20 mm (0.0020 – 0.0079 in.)
Install the side gear and spider with the 4 pinions to the
right side of the differential case. Check the side gear
backlash.
Refer to the table below, and select the thrust washer
which will ensure that the backlash is within the specifica-
tion. Try to select a washer of the same size.
Thickness mm (in.)
0.80 (0.0315)
0.90 (0.0354)
1.00 (0.0394)
1.10 (0.0433)
Install the vehicle speed sensor drive gear.
Author :
MX05J–01
Thickness mm (in.)
1.20 (0.0472)
1.30 (0.0512)
1.40 (0.0551)
–
Date :
1847