Toyota Camry Manual page 1686

3 Check airbag sensor assembly.
P Squib
Airbag
Sensor
Assembly
ACC
or
DLC1
E1 Tc
H01023
AB0118 AB0119
R13006 H01077
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
CHECK:
(a)
(b)
ON
(c)
(d)
DTC B0105/53
(e)
OK:
HINT:
Codes other than code B0105/53 may be output at this time, but
H07479
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0105/53 is not output.
NG Replace airbag sensor assembly.
Author :
DI–659
Date :
894