Toyota Camry Manual page 1724

3 Check airbag sensor assembly.
Squib (RH)
ACC
SFR+
SFR–
DLC1
E1
Tc
H02273
AB0119
AB0118
R13006 H01068
OK
DIAGNOSTICS
PREPARATION:
(a)
Airbag
(b)
Sensor
Assembly
(c)
CHECK:
ON
(a)
or
(b)
DTC B0113/42
(c)
(d)
(e)
H03256
OK:
HINT:
Codes other than code B0113/42 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect SFR+ and SFR– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (RH) and the airbag sensor assem-
bly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See step 5 on page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0113/42 is not output.
NG Replace airbag sensor assembly.
Author :
DI–697
Date :
932