Toyota Camry Manual page 2108

Mark
1, 2, 3, 4, or 5
1
3
7
2
4
8
ENGINE MECHANICAL (5S–FE)
(b)
HINT:
A number is marked on each main bearing cap to indicate the
installation position.
P03177
5.
Install the 2 thrust washers under the No.3 journal position of
the cylinder block with the oil grooves facing outward.
6.
P05354
7.
(a)
P03173
(b)
HINT:
Each bearing cap has a number and front mark.
S06012
(c)
9
(d)
5
10
6
(e)
8.
P00104
– CYLINDER BLOCK
Align the bearing claw with the claw groove of the main
bearing cap, and push in the 5 lower bearings.
INSTALL UPPER THRUST WASHERS
PLACE CRANKSHAFT ON CYLINDER BLOCK
INSTALL MAIN BEARING CAPS AND LOWER
THRUST WASHERS
Install the 2 thrust washers on the No.3 bearing cap with
the grooves facing outward.
Install the 5 main bearing caps in their proper locations.
Apply a light coat of engine oil on the threads and under
the heads of the main bearing cap bolts.
Install and uniformly tighten the 10 bolts of the main bear-
ing cap in several passes, in the sequence shown.
Torque: 59 N·m (600 kgf·cm, 43 ft·lbf)
Check that the crankshaft turns smoothly.
CHECK CRANKSHAFT THRUST CLEARANCE
(See page EM–86)
Author :
EM–109
Date :
1281