Toyota Camry Manual page 1824

INSPECTION PROCEDURE
If the DTC is not displayed, do the following troubleshooting.
1 Does SRS warning light up for approx. 6 seconds?
LOCK
AB0117 AB0118 AB0119
H02309
YES
2 Check voltage between terminals Tc and E1 of DLC1.
ON
ACC
or
(–)
AB0119
AB0118
R14305
NG
DIAGNOSTICS
ACC
ON
or
H02314
E1
Tc
(+)
H00030
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
Check operation of the SRS warning light after ignition switch
is turned from LOCK position to ACC or ON position.
NO Check SRS warning light system.
(See page DI–626)
PREPARATION:
Turn ignition switch to ACC or ON.
CHECK:
Measure the voltage between terminals Tc and E1 of DLC1.
OK:
Voltage: 10 – 14 V
OK Go to step 4.
Author :
DI–797
Date :
1032