Toyota Camry Manual page 1671

DI–644
5 Check spiral cable.
Spiral
Cable
D Squib
D–
(–) (+)
H01000
R14286
OK
6 Check harness between airbag sensor assembly and spiral cable.
Spiral
Cable
D Squib
D–
(–) (+)
H01004
R14286
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a) Disconnect the connector between the airbag sensor as-
sembly and the spiral cable.
Airbag
(b) Release the airbag activation prevention mechanism of
Sensor
the spiral cable connector on the airbag sensor assembly
Assembly
side. (See page DI–626)
CHECK:
For the connector (on the spiral cable side) between the spiral
cable and the steering wheel pad, measure the resistance be-
D+
tween D+ and D–.
OK:
Resistance: 1 MΩ or Higher
H01137
NG
PREPARATION:
Release the airbag activation prevention mechanism of the
connector (on the airbag sensor assembly side) between the
Airbag
airbag sensor assembly and the spiral cable. (See page
Sensor
DI–626)
Assembly
CHECK:
For the connector (on the spiral cable side) between the airbag
sensor assembly and the spiral cable, measure the resistance
between D+ and D–.
D+
OK:
Resistance: 1 MΩ or Higher
NG
H01138
– SUPPLEMENTAL RESTRAINT SYSTEM
Repair or replace spiral cable.
Repair or replace harness or connector be-
tween airbag sensor assembly and spiral cable.
Author : Date :
879