Toyota Camry Manual page 1759

DI–732
3 Check airbag sensor assembly.
Airbag
P/T Squib (RH)
Sensor
Assembly
ACC
or
DLC1
E1
Tc
H01020
AB0118 AB0119
R13006 H01082
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
CHECK:
(a)
(b)
ON
(c)
(d)
DTC B0130/63
(e)
OK:
HINT:
Codes other than code B0130/63 may be output at this time, but
H07485
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0130/63 is not output.
NG Replace airbag sensor assembly.
Author : Date :
967