Toyota Camry Manual page 1868

INSPECTION PROCEDURE
1 Check DOME and DOOR fuses.
E/G room J/B No.2:
DOME Fuse
Instrument panel J/B:
DOOR Fuse
I00268
I00269
OK
2 Check voltage between terminals each of +B1 and +B2 and E of theft deterrent
ECU connector.
+B2
(+)
(–)
NG
DIAGNOSTICS
PREPARATION:
(a)
(b)
CHECK:
Check continuity of DOME and DOOR fuses.
OK:
I00275
PREPARATION:
Disconnect the theft deterrent ECU connector.
CHECK:
+B1
Measure voltage between terminals each of +B1 and +B2 and
E of theft deterrent ECU connector.
OK:
E
I01922
– THEFT DETERRENT SYSTEM
Remove DOME fuse from engine room junction block
No.2.
Remove DOOR fuse from instrument panel junction block
No.1.
Continuity
NG Check for short in all the harness and compo-
nents connected to the DOME and DOOR fuses
(See attached wiring diagram).
Voltage: 10 – 14 V
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–837).
Author :
DI–841
Date :
1076