DI–816
INSPECTION PROCEDURE
1
Check voltage between terminals UL2 of wireless door lock ECU connector and
body ground.
NG
Check and repair harness and connector between wireless door lock ECU and door key lock and
unlock switch.
DIAGNOSTICS
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
UL2(+)
el brace.
CHECK:
Measure voltage between terminal UL2 of wireless door lock
ECU connector and body ground.
OK:
Voltage: 10 – 14 V
I00300
OK
–
WIRELESS DOOR LOCK CONTROL SYSTEM
Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author :
Date :
1051