Toyota Camry Manual page 1736

DTC B0116/48
CIRCUIT DESCRIPTION
The side squib circuit consists of the airbag sensor assembly and side airbag assembly (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0116/48 is recorded when an open is detected in the side squib (LH) circuit.
DTC No.
D Open circuit in SFL+ wire harness or SFL– wire harness
of squib
B0116/48
D Side squib (LH) malfunction
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–700.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check side squib (LH) circuit.
Squib (LH)
SFL–
(–) (+)
H01019
W03859
OK
DIAGNOSTICS
Open in Side Squib (LH) Circuit
(TMC Made)
DTC Detecting Condition
CHECK:
For the connector (on the side airbag assembly side) between
Airbag
the side airbag assembly (LH) and the airbag sensor assembly,
Sensor
measure the resistance between SFL+ and SFL–.
Assembly
OK:
SFL+
H01191
– SUPPLEMENTAL RESTRAINT SYSTEM
D Side airbag assembly (LH)
D Airbag sensor assembly
D Wire harness
Resistance: Below 1 Ω
NG Repair or replace harness or connector be-
tween side airbag assembly (LH) and airbag
sensor assembly.
Author :
DI–709
Trouble Area
Date :
DI1BD–03
944