Toyota Camry Manual page 1699

DI–672
3 Check airbag sensor assembly.
Squib (RH)
ACC
or
DLC1
E1
Tc
H01020
AB0118
AB0119
R13006 H01069
OK
DIAGNOSTICS
Airbag
Sensor
Assembly
ON
DTC B0110/43
H07481
– SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn ignition switch to ACC or ON and wait at least for 20
seconds.
(b) Clear DTC stored in memory.
(See page DI–626)
(c) Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d) Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e) Check DTC.
(See page DI–626)
OK:
DTC B0110/43 is not output.
HINT:
Codes other than code B0110/43 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
Author : Date :
907