Toyota Camry Manual page 1742

5 Check sub wire harness.
Squib (LH)
Sub Wire harness
SFL–
(–) (+)
H02280
W03859
OK
6 Check harness between airbag sensor assembly and sub wire harness.
Squib (LH)
Sub Wire harness
SFL–
(–) (+)
H02281
W03859
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
Disconnect the sub wire harness connector on the airbag sen-
sor assembly side.
Airbag
CHECK:
Sensor
For the connector (on the sub wire harness side) between the
Assembly
side airbag assembly and the sub wire harness, measure the
resistance between SFL+ and SFL–.
OK:
SFL+
H03266
CHECK:
For the connector (on the airbag sensor assembly side) be-
tween the airbag sensor assembly and the sub wire harness,
Airbag
measure the resistance between SFL+ and SFL–.
Sensor
OK:
Assembly
SFL+
H03267
– SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: Below 1 Ω
NG Repair or replace sub wire harness.
Resistance: Below 1 Ω
NG Repair or replace harness or connector be-
tween airbag sensor assembly and sub wire
harness.
Author :
DI–715
Date :
950