Toyota Camry Manual page 2106

Front Mark
(Cavity)
Front Mark
(Protrusion)
ENGINE MECHANICAL (5S–FE)
REASSEMBLY
HINT:
1.
(a)
A06586
(b)
A01776
(c)
(d)
A07349
(e)
A06587
– CYLINDER BLOCK
Thoroughly clean all parts to be assembled.
Before installing the parts, apply new engine oil to all slid-
ing and rotating surfaces.
Replace all gaskets, O–rings and oil seals with new parts.
ASSEMBLE PISTON AND CONNECTING ROD
Using a small screwdriver, install a new snap ring on one
side of the piston pin hole.
Gradually heat the piston to 80 – 90°C (176 – 194°F).
Coat the piston pin with engine oil.
Align the front marks of the piston and connecting rod,
and push in the piston pin with your thumb.
Using a small screwdriver, install a new snap ring on the
other side of the piston pin hole.
Author :
EM–107
EM08L–03
Date :
1279