Toyota Camry Manual page 2042

Cylinder Block Side
Intake Manifold Side
Exhaust Manifold Side
ENGINE MECHANICAL (5S–FE)
(d)
P03363
4.
(a)
If warpage is greater than maximum, replace the cylinder head.
Z02749
(b)
If cracked, replace the cylinder head.
P03269
5.
(a)
(b)
EM0580
– CYLINDER HEAD
Using a soft brush and solvent, thoroughly clean the cylin-
der head.
INSPECT CYLINDER HEAD
Inspect for flatness.
Using a precision straight edge and feeler gauge, mea-
sure the surfaces contacting the cylinder block and the
manifolds for warpage.
Maximum warpage:
Cylinder block side
Manifold side
Inspect for cracks.
Using a dye penetrant, check the combustion chamber,
intake ports, exhaust ports and cylinder block surface for
cracks.
CLEAN VALVES
Using a gasket scraper, chip off any carbon from the valve
head.
Using a wire brush, thoroughly clean the valve.
Author :
EM–43
0.05 mm (0.0020 in.)
0.08 mm (0.0031 in.)
Date :
1215