Toyota Camry Manual page 1826

If the DTC is displayed without a DTC check procedure, perform the following
troubleshooting.
1 Check resistance between terminal Tc of airbag sensor assembly and body
ground.
Airbag Sensor Assembly
LOCK
(+)
(–)
AB0119
H01304
OK
Replace airbag sensor assembly.
DIAGNOSTICS – SUPPLEMENTAL RESTRAINT SYSTEM
PREPARATION:
(a) Turn ignition switch to LOCK.
(b) Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
(c) Disconnect the airbag sensor assembly connector.
Tc
CHECK:
Check resistance between terminal Tc of the airbag sensor as-
sembly connector and body ground.
OK:
H01305
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector.
Author : Date :
DI–799
1034