Toyota Camry Manual page 1792

10 Check side airbag sensor assembly (RH).
Side Airbag Sensor
Assembly (RH)
ACC
or
DLC1
E1 Tc
H01007
AB0119
AB0118
R13006 H01066
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
(c)
Assembly
(d)
ON
CHECK:
(a)
(b)
DTC B1141/33
(c)
(d)
(e)
H01170
OK:
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the side airbag sensor (RH) to the connector that
the side airbag sensor (LH) was connected to.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B1141/33 is not output.
NG Replace side airbag sensor assembly (RH).
Author :
DI–765
Date :
1000