Operating Windrower; Operational Safety; Break-In Period - MacDon M2170NT Operator's Manual

5.3 Operating Windrower

Safely operating your machine requires familiarizing yourself with its capabilities.

5.3.1 Operational Safety

Follow all the safety and operational instructions given in this manual.
CAUTION
Follow these safety precautions:
• Wear close-fitting clothing and protective shoes with slip-
resistant soles.
• Remove foreign objects from the machine and
surrounding area.
• Carry with you any protective clothing and personal safety
devices that could be necessary throughout the day. DO
NOT take chances. You may need:
• A hard hat
• Protective glasses or goggles
• Heavy gloves
• A respirator or filter mask
• Wet weather gear
• Protect against noise. Wear suitable hearing protection
such as ear muffs or ear plugs to protect against loud
noises.
• Follow all safety and operational instructions given in your
operator's manuals. If you do not have a header manual,
get one from your Dealer and read it thoroughly.
• NEVER attempt to start the engine or operate the machine
except from the operator's seat.
• Check the operation of all controls in a safe area before
starting work.
• Check for excessive vibration and unusual noises. If there is
any indication of trouble, shut down and inspect the
machine. Follow the proper shutdown procedure. For
instructions, refer to Shutting down Engine, page
• Operate only in daylight or good artificial light.

5.3.2 Break-in Period

The windrower is ready for operation when it leaves the factory; however, several items must be monitored during the first
150 hours of operation.
DANGER
Before investigating an unusual sound or attempting to correct a problem, place the ground speed lever (GSL) in PARK,
shut off the engine, and remove the key.
262171
OPERATION
Figure 5.4: Safety Equipment
Figure 5.5: Safety Equipment
199.
187
Revision A