Disengaging Reel Safety Props - MacDon D65 Operator's Manual

3. At the center reel arm on double reel headers, use
handle (A) to move lock rod to inboard position (B),
engaging pin (C) under prop.
4. Lower reel until safety props contact cylinder mounts
on outer reel arms and pin at center arm.

Disengaging Reel Safety Props

1. Raise reel to maximum height.
2. At outer reel arms, push props (A) back inside
reel arms.
169594
OPERATION
Figure 4.4
A - Handle
C - PIn
Figure 4.5: Push props inside reel arms
36
B -Inboard position
Rev. C