Disengaging Reel Safety Props - MacDon D65 Operator's Manual

3. At the center reel arm on double reel headers, use
handle (A) to move lock rod to inboard position (B),
engaging pin (C) under prop.
4. Lower reel until safety props contact cylinder mounts
on outer reel arms and pin at center arm.

Disengaging Reel Safety Props

1. Raise reel to maximum height.
2. At outer reel arms, move props (A) back inside
reel arms.
169899
OPERATION
Figure 4.4: Center Arm Reel Prop
Figure 4.5: Reel Arm Safety Prop
36
Revision A