Setting Reel Speed In Auto Mode - MacDon M2170NT Operator's Manual

Setting Reel Speed in Auto Mode

This adjustment requires the header to be engaged. The instructions in this section show you how to set the reel speed in
auto mode using the HarvestTouch
1. Engage the header to display header run screen 1 or 2, and
then press REEL SETTINGS icon (A).
2. Set AUTO switch (A) to the ON position to access the
following auto reel speed parameters:
• Minimum reel speed (B)
• Reel index (C)
NOTE:
These settings are grayed-out in manual mode.
3. To set the minimum reel speed, press arrows (B) beside
MINIMUM REEL SPEED and select a value within the
adjustment range: (1.6–8 km/h [1–5 mph]). The default is
5 km/h (3.0 mph).
NOTE:
When AUTO mode is on, the speed is displayed in km/h or
mph and cannot be changed.
4. To set the reel index value, press arrows (C) beside REEL
INDEX and select a value within the adjustment range:
- 8.0–8.0 km/h (- 5–5 mph) (zero—which is equal to ground
speed—is the default).
262171
OPERATION
™
Display.
256
Figure 5.129: HarvestTouch
Run Screen
Figure 5.130: Reel Adjust Page
A
™
Display - Header
A
B
C
Revision A